How Does the PCA "Virtual Enclosure Engine Work?

Before You Begin?
It is helpful, but not required to know the width of the opening on your home before beginning.  This will allow you to better determine what your opening will actually accommodate in real terms.  For example, if the opening on your home were 50" wide, double doors would not be suggested due to the fact that each door would have to be less than 24" in width when installed.  Please refer to the chart below for more detailed information.
 
MINIMUM WIDTHS REQUIRED for proper installation of various PCA Components
 

 
Step 1:  Select Your Opening Shape
The object here is to first determine which Opening Shape presented most accurately depicts what you have on your home. Each enclousure is shown in either a single or a double door setup.
 
Step 2:  Select Your Door of Choice
Do this by "clicking" the "Select Door" option from the navigational bar found on the left-hand side of your screen or click on the door(s) in the virtual enclosure.

Step 3:  Select Your Sunburst of Choice
Do this by "clicking" the "Select Sunburst" option from the navigational bar found on the left-hand side of your screen or click the sunburst in the virtual enclosure.

Step 4:  Select Your Side-Lite of Choice
Do this by "clicking" the "Select Side-Lite" option from the navigational bar found on the left-hand side of your screen or click on one of the side-lites in the virtual enclosure.

Step 5:  Get a Description of the PCA Items Used
Do this by "clicking" the "List Components" option from the navigational bar found on the left-hand side of your screen.
 
 
Be Creative!
At any time you can change the Door Series, Sunburst Series, and Side-Lites.  You can even change from a Single Door Enclosure to a Double Door Enclosure with just a few clicks.